DIAL TONE GATEWAY (ATA) INSTALLATION

DIAL TONE GATEWAY (ATA) INSTALLATION

Installing a Dial Tone Gateway (also known as an ATA or Analog Telephone Adapter) is easier than expected. Follow this step by step guide to ensure proper connectivity.

GET TO KNOW YOUR INSTALLATION:




Step 1. Plug the Ethernet/Data Cable coming from your Internet provider to the Internet Port on the ATA.



Step 2: Plug the Power Cord in to the Power Port and power the device. 
Notes
(If applicable) Power all devices using their corresponding Power Cords.

Step 3. Plug the phone cord to the #1 Phone Line on the ATA and plug the opposite end to your desk phone.


(If applicable) The #2 Phone Line port can be used for more devices, phone or fax.

Upon completion, your phone will have dial tone and you can begin making calls.


Thank you for your business! If you have any questions, please contact our Support Department at (530) ONE-STOP.